![]() ![]() Kit includes T-connector to connect to a new or existing NMEA 2000 network. *Digital trim must be connected by a Yamaha dealer. The vessel must be equipped with an existing or new NMEA 2000® network (backbone) or one must be installed. This output from the engine can be displayed on Navico Multi-Function Displays such as the Lowrance HDS, Lowrance LMF-200 and 400 gauges, the Simrad NSS/NSE/NSO the B&G Zeus as well as NMEA 2000 Compatible displays from other manufacturers. Many Yamaha outboard engines have the ability to output engine data to a NMEA 2000® network. Yamaha® Engine Connection for NMEA 2000® Messages I have read the numerous threads online regarding the Yamaha trim readings and I have connected the two pink wires in the front. 2014 Keywest 176CC 2014 Yamaha 90HP, Lowrance HSD-7 with all Lowrance cables. Yamaha engine interface cable 4.5 m (15 ft) and T-connector As the title states: Hooked up a NMEA2000 network. ![]() ![]() I have found where some operators have ran a harness from the Outboard to the NMEA 2000. My boat has Round Command Link Gauges and Believe it is rigged like The Yamaha Rigging Guide -11 'No Hub'. Lowrance Yamaha Engine to NMEA 2000 Network Interface Cable The GPS is a Garmin GPSMAP 1242xvs and requires Engine data thru the NMEA 2000 port. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |